Strange Pro Race Axle Package

28, 30, 31 and 35 spline Hy-Tuf axle package with 5/8 Stud Kit

Hy-Tuf is in a class of ultra-strength alloys configured with a low concentration of carbon and high degrees of manganese, nickel, and molybdenum steel. Strange Pro Race Axles are through-hardened to a tensile strength of 240,000 psi allowing them to retain the necessary degree of ductility required for elite level drag racing.

Strange Pro Race axles are the best value on the market today. That’s why more drag racing competitors rely on Strange axles than all other brands combined! Contact a Strange sales technician to discuss your specific application.

We Cut Before Heat Treatment, Not After.
Strange Hy-Tuf Drag Race axles are thru hardened. This specific type of heat treatment hardens the axle all the way to it’s core providing exceptional torsional strength.

We can not stress enough the importance that Strange Engineering does all of its machine work on the splines prior to heat treatment. This allows for consistent heat treat depth, leading to a stronger axle. Be aware that some companies induction heat-treat the material before the splines are machined into the axle, which causes it to be weaker despite the shiny look.

Strange axles are typically manufactured with a larger than stock axle bearing diameter area. This provides more strength in an area that may see additional stress due to tire shake.

Applications

28 Spline axle applications cover; * Chevy 10 bolt, * Ford 8.8 and Ford 9 in.

30 Spline axle applications cover; * Chevy 12 bolt, and Mopar 8 3/4

31 Spline axle applications cover; * Ford 8.8 and Ford 9 in.

35 Spline axle applications cover;   Dana 60, * Chevy 12 bolt, * Ford 8.8, Ford 9 in and Mopar 8 3/4

* With Aftermarket Ends

 
Hy-Tuf Axles Are Optimized For Drag Race Use Only
See our Alloy axle packages for street / track applications

Hy-Tuf Axle Splines
Chevy 8.2 10 bolt – 28 / 33
Chevy 8.5 10 bolt – 28 / 30 / 33
Chevy 12 bolt car – 30 / 33 / 35
Dana 60 – 35 / 40 *
Ford 8.8 – 28 / 31 / 33 / 35
Ford 9″ – 28 / 31 / 33 / 35 (requires 3.250″ bore case) / 40 *
Mopar 8 3/4″ – 30 / 35
57-64 Olds/Pontiac – 31 / 35

* 40 spline packages – P1014 / P1016

All Chevy & Ford 8.8 Applications Require Replacement 3.150″ Housing Ends
Packages with C-clip Eliminator kit for OEM housing ends are shown near the bottom

Dana 60 & Mopar 8 3/4″ With 2.875″ I.D. Housing Ends
These applications require bearings with integrated retainer plates – P100858

Small Ford 2.835″ I.D. Housing Ends
Requires special retainer plates when used with drum brakes – P100858
May also be required with some aftermarket disc brakes
Check with your brake kit manufacturer

Hy-Tuf Ultra Strength Axles
• Forged from low carbon, high manganese, high nickel, and high molybdenum steel
• Majority of machining performed before heat treat to provide consistent hardness
• Thru hardened to Rc 45-48 to maximize the material’s torsional strength
• Finish machined after heat treat to ensure accuracy
• Choice of 28 up to 35 spline
• Lengths up to 34 7/8″
• Choice of bolt circle
• Forged in the USA
• Designed and machined by Strange Engineering

Sealed Ball Bearings – A1019 / A1021 / A1023A
• Low friction bearings designed specifically for Drag Racing
• O.D. grooved for o-ring to eliminate inner axle seal
• Includes o-rings and locking collars

Choice of 5/8″-18 Stud Kit

Bolt Style – A1027 / A1027L / A1027S
• 5/8″-18 x 3″ Grade 8 fully threaded bolts
• Length measured from underneath the hex of the stud
• Thin .200″ hex head provides additional clearance
• Width choice of anti-marring/spacer washers
• Includes threaded sleeves, installation tool & flanged lug nuts

Shank Style – A1036 / A1037 / A1037MD / A1038 / A1039 / A1041
• 5/8″-18 chrome moly stud available in six different shank lengths
• Width choice of anti-marring/spacer washers
• Includes thin head self locking inner nuts & flanged lug nuts

Options
Install axle bearings – A1008
Five 1″ round lightening holes in axle flange – A1003
Ultra Light flange – A1006

Other Pro Race Axle Packages
With retainer plates – P100858
With spool – P200758

Axle Packages With C-Clip Eliminator Kit
OEM Chevy ends – P1011GDR58
OEM Ford Mustang 8.8 ends – P1011F8658 / P1011F9458 / P1011F0558

Pro Race 40 Spline Axle Packages
Gundrilled – P1014
Solid – P1016
With spool – P2015 / P2017

Street / Strip / Oval Track Axle Package With Eliminator Kit
OEM Chevy car ends – P1011GOT58

Alloy Street / Track Axle Packages
With 5/8″ studs – P310258 / P350258
With spool – P310258S P350258S