Skip to content
Hose Guide (Braided PTFE) – 90 Degree
This very nifty device allows you to easily route your hoses around corners. Typically when you bend a hose around a corner, it has a tendency to relax to a wider radius. Additionally, if you bend the corner too sharply you can exceed the minimum bend radius of the hose, which can result in damage to the hose and/or a reduced internal diameter from the kink, which can reduce flow through the hose.
The Hose Guide from FLF solves this problem by forcing the hose to sit at exactly the engineered minimum bend radius for that hose, and because the hose is routed through the guide it will prevent it from relaxing, avoiding issues like rubbing or possibly touching or damaging other components such as frame rails, intercooler pipes, cables/wiring, or spinning components such as pulleys.
Technical information & fitment help
Finish Line Factory technical library · Hose dimensions & pressure ratings · Choose PTFE or rubber hose
Confirm the exact part, connection and operating conditions before assembly. Ask Lee Motorsports about your setup.